ALUMINIUM FOIL TAPE

 

Description & Feature

 

A 30 micron (10 mil) high tensile strength aluminium foil backing, combined with a high performance synthetic rubber-resin adhesive protected by an easy-release paper.

 * Aluminium backing provides excellent reflection of both heat and light.

 * High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim Kraft Facing joints and seams sealing in HVAC ductwork application.

Low moisture vapor transmission rate makes an excellent vapor barrier.

Service temperature range from -20 to +80oC (+4 to 176oF)

 

 

Typical Physical Properties

 

PROPERTIES

 METRIC

ENGLISH

TEST METHODE

Foil Backing

30 Micron

1.0 Mil

PSTC - 33

Total Thickness(Foil+Adhesive)

70 Micron

2.6 Mil

PSTC - 33

Peel Aches or Stainless Steel

25 N / 25 mm

90 OZ/ln

PSTC - 1

Peel Adhesion to Backing

25 N /25 mm

90 OZ/In

PSTC - 1

Rolling Tack ( 11 mm bell )

20 cm

8.0 in

PSTC - 6
Holding Power 5.000 + Min 5.000 + Min PSTC - 7
Service Temperature Ranger -20 -+ 80C +4 -+ 176F -----------

 

Typical Applications

HVAC Industry ffor joining and sealing Foil Scrimp-Kraft-Facing laminated fiber glass blanket / duct board joins and seams: joining and sealing flexible air duct seams and connections, may also be used for other industrial uses requiring a tape with these characterictics and benefits.

 

Product Form & Size Available

Cut Roll: 48/50mm(2") / 60/63mm(2.5") / 72/75mm(3") / 96/100mm(4")

Log Roll: 1200mm x 45 / 50m

 

Storage & Shelf Life

One year when stored at 21oC (70oF)/ 50% relative humidity out of direct sunlight.

 

Surface Preparation

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

 

 

See Also : PRODUCT USE